When using the web control function or Denon Remote App, use with the “IP Control” setting set to “Always On”. Enter the IP address of your Extend into your web browser using your PC. When using the web control function or Denon Remote App, use with the âIP Controlâ setting set to âAlways Onâ. IP Control is available for Denon AV receiver models sold after 2010 which are connected to the same network as the HEOS Drive and Controller devices. IP Control is available for Denon AV receiver models sold after 2010 which are connected to the same network as the HEOS Link and Controller devices. Network is on during standby. Network is on during standby. (1)Press SETUP MENU button, then Menu appears on FL-display (and GUI) (2)Select “Setup Menu > Network > IP Control” (3)Set parameters described below. Enter the default username and password (you can change this using the Web Interface). Enables network communication in standby power mode. For example, if the IP address of this unit is “192.168.100.19”, enter “http://192.168.100.19”. Enter the IP address of your Extend into your web browser using your PC. Select IP. Suspend network function during standby. Select the AVR that you have your HEOS Drive is connected to. Determine the IP address of your Extend using the âAboutâ feature described above. Enter the default username and password (you can … Enter the IP address of this unit in browser’s address box. Copyright © 2014 D&M Holdings Inc. All Rights Reserved. When the top menu is displayed, click on the menu item you want to operate. Connecting to the Web Interface via IP Address. Main unit operable with a network compatible controller. When âIP Controlâ is set to âAlways Onâ, it consumes more standby power. Enables network communication in standby power mode. Copyright © 2014 D&M Holdings Inc. All Rights Reserved. To memorize settings, click “Save” on the Setup Menu screen. Connecting an iPod or USB memory device to the USB port, Playing back files stored on a PC and NAS, Operating external devices with the remote control unit, Types of input signals, and corresponding sound modes. Connecting to the Web Interface via IP Address, Connecting to the Web Interface via UPnP (Windows 8/7/Vista), Connecting to the Web Interface via Bonjour (Mac OS X), Connecting to the Web Interface via wired PC, Configuring the Advanced Network Settings. Select IP… Main unit operable with a network compatible controller. Determine the IP address of your Extend using the “About” feature described above. “Always On”---Use this setting when using the AVR-X3000 Connected in a network. IP Control. You can use the “Save” and “Load” functions to store or recall various function settings using web control from a PC.